Clone a Single Hard Drive to a RAID Drive

• Create your RAID array

NOTE: Be sure to have your RAID driver disk ready.

• Start the Windows install
• Press F6 to specify additional drivers
• Insert driver disk
• Press S to specify the drivers for your RAID controller and continue with the installation
• After the install is complete, boot to the UBCD4Windows
• Copy all the files from the single drive to the RAID drive -DON'T CLONE/IMAGE THE PARTITION
• Reboot to the RAID drive

You should now have a perfect copy on your RAID drive with all the updates (if Windows was up to date on the single drive).

– Main.FredPettis - 21 Apr 2009