User Tools

Site Tools


setupdnsmax

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

setupdnsmax [2013/01/27 21:29] (current)
Line 1: Line 1:
 +====== Setting up DNSMax.pl for use with ThatIP/​DNSMax ======
 +<​p>​This took a little more than I thought it would. I think part of the reason is my own fault for updating CPAN, but at least it's at the latest version. The tricky part was getting OpenSSL and Crypt::​SSLeay to play nice together.</​p>​
 +<​p>​Here'​s the basic steps/notes that come with the script (http://​www.dynamicdnsclient.com/​files/​ddns/​dnsmax-perl-1.0.1.zip):​
  
 +<​file>​
 +Installation Notes
 +-------------------
 +dnsmax.pl depends on the following Perl packages which may or may not
 +already be installed on your system.
 +
 +XML::Simple
 +Digest::MD5
 +LWP::​UserAgent
 +HTTP::​Request
 +HTTP::​Response
 +Crypt::​SSLeay
 +
 +If these packages are not installed, you can install them by running ​
 +the following commands.
 +
 +At the system command line:
 +  perl -MCPAN -e shell
 +
 +At the CPAN command line:
 +  install XML::Simple
 +  install Digest::MD5
 +  install HTTP::​Request
 +  install HTTP::​Response
 +  install Crypt::​SSLeay
 +
 +Additionally,​ Crypt::​SSLeay depends on OpenSSL. OpenSSL is available from
 +http://​www.openssl.org/​.
 +</​file></​p>​
 +<p>If you get '​make'​ errors when installing the modules, check the following from the CPAN shell:</​p>​
 +Type 'o conf' to look at the configuration variables (these may vary slightly depending on distro).
 +<​file>​
 +build_cache ​       [10]
 +make_install_arg ​  ​[UNINST''​1]
 +mbuild_install_arg [UNINST''​1]
 +mbuild_install_build_command [./Build]
 +wget               ​[/​usr/​bin/​wget]
 +</​file>​
 +If the error is only on the SSLeay module try
 +<​file>​
 +sudo apt-get install openssl libssl-dev
 +</​file>​
 +Then install the SSLeay module.
 +
 +
 +
 +
 +-- Main.FredPettis - 05 Mar 2009
setupdnsmax.txt ยท Last modified: 2013/01/27 21:29 (external edit)